













* Speed test method: The fully charged device is run at no load for 2 minutes and the speed is then tested with an infrared tachometer.
* Spindle runout (i.e. precision bit concentricity) test method: A standard test rod is inserted into the output shaft. A laser diameter gauge is used to measure the runout at a distance of 25.4mm from the end surface of the output shaft.
* The dimensions stated may vary or be inaccurate due to different measurement conditions.
* Screwing test method: The device is fully charged until the white lamp is illuminated. The ST2 x 5mm self-tapping screw is then driven into the pine board until the battery runs out.
* Hardness varies by ±2HRC. Screwdriving bit hardness tests were conducted by the National Light Industry Tool Hardware Quality Supervision & Testing Station, Shanghai. Report No.: G20200215.
* Torque at level I varies by ±0.03Nm and torque at level II varies by ±0.08Nm. Torque test method: The fully charged device is run without load for 2 minutes and a torque tester is then used to measure the torque at levels I and II.
* The battery was tested by the Southern Testing Company of the China Certification & Inspection Group. Report No.: SET2019-08673. The battery protection tests were conducted by Precise Testing & Certification (Guangdong) Co., Ltd.; Report No.: PTC20032303001S-GB01.* Unless otherwise indicated, all data referred to on this page is from the HOTO Laboratory. Data may vary or be inaccurate due to differences in the objective environment and other factors.
Specifications
Product model: MJDDLSD003QW
Maximum torque at level I: 0.05Nm
Product colour: Grey
Maximum torque at level II: 0.2Nm
Product dimensions: 201.8 x 74.2 x 25.2mm
Maximum manual torque: 3Nm
Net product weight: 353g
Charging specifications: 5V⎓0.14A
Screwdriver dimensions: 159 x φ16.4mm
Rated voltage: 3.7⎓
Net screwdriver weight: 59g
Lithium battery: 350mAh
Charging time: 160–200min
No-load speed: 170rpm
Screwdriving bit parameters
Screwdriving bit specifications: C4 x 28mm, C4 x 45mm
Screwdriving bit material: S2 steel
Phillips head: PH000/PH00/PH0/PH1
Pentagonal: P2/P5
Hex: H0.7/H0.9/H1.5/H2.0
W Type: W1.5
Slotted: SL1.5/SL2.0
Y Type: Y0.6/Y1
Torx: T2/T3/T4
Tri-wing: 2.3
Torx with pin hole: TH5/T6H/T8H/T9H/T10H
Note: C4 x 45mm for PH0/PH1/SL2.0/T8H/T10H/H2.0, C4 x 28mm for all other types
Package contents
Storage container x1
Xiaomi Electric Precision Screwdriver x1
Screwdriving bit x24
Type-C charging cable x1
User manual x1
Reviews
There are no reviews yet.